Sea-Doo 325 GPS Speed Control Override Module (SCOM)

Our Sea-Doo 325 SCOM-X removes the GPS speed limiter from 2024+ Sea-Doo 325 watercraft.  It allows your 2024 Sea-Doo RXP-X 325 and 2024 Sea-Doo RXT-X 325 to achieve their full speed potential while staying within the original RPM limiter to preserve warranty.

Speed increase is substantial!  Your Sea-Doo 325 will be capable of reaching 80+ mph, or 129 kph+, on cluster and even 81 – 82 mph on low fuel and good water conditions.  For best results, test with low fuel and shift your body weight towards rear of the seat.

Start In Sport Mode is a build-in feature which will enable Sport Mode upon startup. Please note that for the ski to start in sport mode, the gauge cluster must be powered up prior to starting the engine. Simply short press the start button, wait few seconds for the cluster to power up and then start the engine. This is especially important on the full color cluster, you must wait for the warning message to disappear before starting the engine to trigger sport mode start up.

Installation

Remove the seat and locate the large connector next to the coolant overflow bottle

Release the red safety lock by pushing it away from the connector.

With the safety lock released, press down on the locking tab and at the same time pull apart the connector.

Plug-in one end of SCOM-X until you hear a click, then engage the red safety lock by pushing it towards the connector as pictured below.

Plug-in the other end of SCOM-X until you hear a click and engage the red safety lock.

Your Sea-Doo 325 SCOM is now installed.  We recommend securing it using the included zip ties.  Enjoy!